2.   Full Surface Inspection

A complete surface inspection is when a professional car detailer goes over the whole unit to look for any dirt, stains or defects that may be present.

After washing the car, it should be inspected under bright artificial light or direct sunlight. This helps to detect any damages or flaws that might not be visible under normal lighting. During the inspection, all defects are noted down, including the suggested treatment for each.

3.   Removal of Scratches

The first step is to identify the type and depth of the scratch. If the scratch is only in the clear coatings, it can be removed with a polisher. However, if the scratch has penetrated the base coat, it will require a more intensive technique.

The next step is to select the appropriate product specifically designed for removing every scratch. Then apply the detailing solution around the affected area before rubbing the scratch-removing compound. We use only an adequate amount and with a foam applicator pad, the compound is worked into the scratch in a circular motion.

4.   Eliminating Swirls

Swirls are smears and streaks that look like blemishes on the vehicle’s coatings. And when it catches the light, it makes the car look dull. They’re often caused by cleansing the car with a dirty towel or using the wrong kind of wax.

There are, however, a few simple steps you can take to eliminate swirls and restore the vehicle’s exterior to its former glory. After removing any dirt or debris with a quick car wash using quality car soap, use a clay bar to remove any embedded swirls and other contaminants from the surface of the car.

5.   Smoothing Buff Marks

Car detailing Gold Coast offers a comprehensive approach to correcting paint defects, blemishes and other issues that otherwise affect the aesthetics of your car. One of the best ways to ensure the quality of paint protection is by smoothing any buff marks.

This detailing service is performed with a light sanding. Depending on the severity of the marks, the sanding can be done a few times. The next step is to apply a primer or sealer to the vehicle’s surface. This will help even out the surface and provide a smooth foundation for the new membrane.

After the primer has been applied, several coats of new paint are applied. Each coat is allowed to dry completely before the next one is applied. The car is, then, buffed using a special machine to remove any excess coating and leaves a smooth, glossy finish.

6.   Regular Detail Wash

Before buffing the surface of the car, a detailer may perform a regular detail wash as an optional step to ensure that no residue from the correcting compounds and sanding is left, hence, assuring that your car will end up with a smooth finish.

The procedure involves bathing the cars with a special soap that contains carnauba wax, helping create a barrier against dirt, dust and other airborne particles from settling on the paintwork.

This detailing step also involves cleaning and refreshing the interior of the vehicle. Every car detail in the dashboard, seats, mats and upholstery of your car is inspected, cleaned, polished and repaired as necessary. In some cases, the wheels are also cleaned and detailed for aesthetics and functionality.

7.   Ceramic Coating

A ceramic coating is an excellent way to maintain the showroom finish of your car. This protective coating involves the use of a liquid polymer clear coat to protect the exterior from UV rays, bird droppings, tree sap and other environmental contaminants.

After prepping the surfaces of the car, our professional and experienced Gold Coast car detailing team will apply a thin layer of ceramic coating. We at Attention Detailing understand that every vehicle is valuable. So, you can be sure that your car blazes the streets of Brisbane and the Gold Coast.

8.   Curing Stage

The curing stage is the process of drying up the ceramic coatings making sure that they are perfectly bonded onto the surface of your vehicle. In most cases, the duration depends on the environmental factors in your area.

While it is best to dry it up naturally under the sun, our detailers offer a few techniques, such as using a curing oven or UV lamp, to speed up the wait time without compromising the quality of the ceramic paint.

If you’re looking for the ultimate car detailing protection, ceramic coating is the way to go. It is a clear liquid coating applied to the exterior of a car that acts as a barrier between the vehicle’s paint and the outside world. And best of all, our ceramic paint protection Gold Coast comes with a 9 years warranty.

Driving through the busy street of the Gold Coast and other QLD roads to have a full detail at a car specialist company can truly be a hassle. That is why Attention Detailing will come to your location and provide comprehensive mobile car detailing to revive the new car vibe of your vehicle. Not to mention that it comes with a lifetime guarantee .

Whether at your residence or workplace, we can make it happen. Our professional car detailing and correction services include polishing the vehicle’s paintwork to remove minor imperfections and revitalise the paint to its original gloss and brilliance.

At Attention Detailing, we have the knowledge and years of experience to perform correction, ceramic paint protection and other car detailing services flawlessly. We’ll start by assessing the condition of your vehicle’s paint and identifying any areas that need attention. Then, we’ll use our state-of-the-art equipment to buff out unwanted marks and defects.

We also use a variety of techniques in our packages, including polishing, sanding, compounding and waxing, to remove scrapes and other imperfections. So you can be sure that the result will be a car that looks as good as new.

From washing to waxing, there’s a lot of work that goes into maintaining that showroom shine. But even the most fastidious car owner can’t always prevent their paint from becoming compromised. Only by using high-quality products can we ensure to protect your vehicle’s exterior from future damage. And not to mention unparalleled Gold Coast car detailing services.

Gtechniq Applicators

With a 9H hardness rating, the Gtechniq car ceramic coating is sure to protect your vehicle’s paint from scratches, swirls, and other blemishes. And because it’s hydrophobic, it will also make it easier to wash off dirt and grime.

Beadlock Pro Marine

With a 10H hardness rating, Beadlock Pro will protect your boat’s hull from blemishes, scrapes, and other damage. And because it’s slip-resistant, it will also help prevent you from slipping and falling on wet surfaces. The best thing about Beadlock is that it also works for cars and other vehicles.